মাসের ১০ তারিখের মধ্যে আপনার ইন্টারনেট বিল জমা দেওয়ার জন্য অনুরুদ করা হলো অন্যথায় আপনার ইন্টারনেট সংযুক্ত বিছিন্ন করা হবে
Home 10 PPP

PPP

Site-toSite GRE Configuration Between Mikrotik And Cisco Router

CiscoRouter Configuration: R1>enable R1#conf t R1 (config)# hostname CiscoRouter CiscoRouter (config)# interface FastEthernet0/0 CiscoRouter (config-if)# ip address 104.10.1.2 255.255.255.252 CiscoRouter (config-if)#no shutdown CiscoRouter (config-if)#exit CiscoRouter (config)# interface FastEthernet0/1 CiscoRouter (config-if)# ip address 172.16.2.1 255.255.255.0 CiscoRouter (config-if)# no shutdown CiscoRouter (config-if)# exit CiscoRouter (config)# interface tunnel 0 CiscoRouter (config-if)# ip ip address 192.168.1.2 255.255.255.252 CiscoRouter (config-if)# no shutdown CiscoRouter (config-if)# tunnel ...

Read More »

Mikrotik Routers Site to Site GRE over IPSec VPN Tunnel Configuration | IPSec VPN Setup

How to configure GRE over IPSce VPN Tunnel, IPSec VPN cannot forward any multicast and broadcast traffic as a result any dynamic routing protocol such as OSPF,RIP or EIGRP cannot forward traffic.GRE Protocol support transport traffic over IPSec VPN Tunnel.Mikrotik IPSec VPN tunnel protect LAN Traffic between two remote sites. Mikrotik 1 Router IP Address Configuration: [admin@MikroTik1] > ip address ...

Read More »

How To L2TP VPN Server Configuration Using Mikrotik Router

L2TP used by service providers to provide VPN service over the internet.It is extension protocol of PPTP.L2TP dose no support encryption or confidentiality .L2TP packet including payload and header is sent  within UDP.L2TP have two endpoints LAC and LNS. L2TP full meaning Layer 2 Tunneling Protocol,L2TP is Microsoft propitiatory,that can support Remote desktop VPN Server without any other VPN Software.It is easy ...

Read More »

How To Site to Site L2TP VPN Tunnel in Mikrotik Router

[admin@HQ Router] > address add address= 180.140.100.2/30 interface=ether1 [admin@HQ Router] > address add address= 172.16.1.1/24 interface=ether2 [admin@HQ Router] > interface l2tp-server server set enabled=yes[admin@HQ Router] > ppp profile add name=L2TP local-address=172.16.100.1 remote-address=172.16.100.2[admin@HQ Router] > ppp secret add name=test profile=L2TP service=l2tp password=123 local-address=172.16.100.1 remote-address=172.16.100.2 routes=”10.1.1.0/24,172.16.100.2″[admin@HQ Router] > ip route add dst-address=0.0.0.0 gateway=180.140.100.1 [admin@HQ Router] > ppp active print Flags: R – ...

Read More »

PPTP Remote Access VPN Server Configuration in Mikrotik

 Point to point tunneling protocol is a method for implementing virtual private network .PPTP used controll channel over TCP and GRE  and encalsulting ppp packet.PPTP have many kind of security variability key establishment. Basic Ip Address Configuration: ip address> add address=103.7.248.206 interface=PUBLIC ip address> add address=192.168.1.1 interface=LOCAL /ip pool> add name=VPNPOOL ranges=192.168.1.2-192.168.1254  NAT Configuration: /ip firewall nat> add chain=srcnat action=masquerade ...

Read More »

Mikrotik RouterSite-to-Site PPTP VPN Server Configuration

[admin@HQRouter] > address add address= 180.140.100.2/30 interface=ether1 [admin@HQRouter] > address add address= 172.16.1.1/24 interface=ether2 [admin@HQRouter] > interface pptp-server server> set enabled=yes[admin@HQ Router] > ppp profile add name=PPTP local-address=172.16.100.1 remote-address=172.16.100.2[admin@HQRouter] > ppp secret add name=branch profile=PPTP service=pptp password=123local-address=172.16.100.1 remote-address=172.16.100.2 routes=”10.1.1.0/24,172.16.100.2″[admin@HQ Router] > ip route add dst-address=0.0.0.0 gateway=180.140.100.1  Remote Router Configuration: [admin@REMOTERouter] > address add address= 103.31.178.2/30 interface=ether1 [admin@REMOTERouter] > address add address= ...

Read More »