মাসের ১০ তারিখের মধ্যে আপনার ইন্টারনেট বিল জমা দেওয়ার জন্য অনুরুদ করা হলো অন্যথায় আপনার ইন্টারনেট সংযুক্ত বিছিন্ন করা হবে
Home 10 Tunnels

Tunnels

Mikrotik Router Policy-based Routing Using VLAN Configuration

IP address Configuration: /ip address add address=59.152.105.14/30 network=59.152.105.13 broadcast=59.152.105.15 interface=WAN1 add address=59.152.103.214/30 network=59.152.103.213 broadcast=59.152.103.215 interface=WAN2 VLAN Configuration on  Mikrotik Router: /interface vlan add name=VLAN-100 interface=LOCAL vlan-id=100 add name=VLAN-200 interface=LOCAL vlan-id=200 /ip address add address=192.168.10.1/24 interface=VLAN-100 add address=172.16.10.1/24 interface=VLAN-200  DNS Configuration: /ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=5000KiB max-udp-packet-size=512 servers=4.4.4.4,8,8.8.8.8 NAT Configuration: /ip firewall nat add chain=srcnat action=masquerade src-address=192.168.10.0/24 out-interface=WAN1 add chain=srcnat ...

Read More »

How To Client Based Policy Routing In Mikrotik Router

IP address Configuration: /ip address add address=59.152.105.14/30 network=59.152.105.13 broadcast=59.152.105.15 interface=WAN1 add address=59.152.103.214/30 network=59.152.103.213 broadcast=59.152.103.215 interface=WAN2 add address=192.168.10.1/24 network=192.168.10.0 broadcast=192.168.10.255 interface=LOCAL_1 add address=172.16.10.1/24 network=172.16.10.0 broadcast=172.16.10.255 interface=LOCAL_2  DNS Configuration: /ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=5000KiB max-udp-packet-size=512 servers=4.4.4.4,8,8.8.8.8 NAT Configuration: /ip firewall nat add chain=srcnat action=masquerade src-address=192.168.10.0/24 out-interface=WAN1 add chain=srcnat action=masquerade src-address=172.16.10.0/24 out-interface=WAN2 Mangle Configuration for 192.168.10.0/24 forward interface WAN1 and 172.16.10.0/24 forward ...

Read More »

How To Site to Site IPSec VPN Tunnel In Mikrotik Router Configuration

VPN sometime called VPN Tunnel,gives the engineer  two remote site a way to send a packet between two site with private ip address through the internet,Ipsec site-to-site vpn tunnel used to allow the secure transmission between to remote site .VPN provides privacy,encryption and verification that the sender legitimate. In this scenario two remote office router are connected to internet and ...

Read More »

Site-toSite GRE Configuration Between Mikrotik And Cisco Router

CiscoRouter Configuration: R1>enable R1#conf t R1 (config)# hostname CiscoRouter CiscoRouter (config)# interface FastEthernet0/0 CiscoRouter (config-if)# ip address 104.10.1.2 255.255.255.252 CiscoRouter (config-if)#no shutdown CiscoRouter (config-if)#exit CiscoRouter (config)# interface FastEthernet0/1 CiscoRouter (config-if)# ip address 172.16.2.1 255.255.255.0 CiscoRouter (config-if)# no shutdown CiscoRouter (config-if)# exit CiscoRouter (config)# interface tunnel 0 CiscoRouter (config-if)# ip ip address 192.168.1.2 255.255.255.252 CiscoRouter (config-if)# no shutdown CiscoRouter (config-if)# tunnel ...

Read More »

Mikrotik Routers Site to Site GRE over IPSec VPN Tunnel Configuration | IPSec VPN Setup

How to configure GRE over IPSce VPN Tunnel, IPSec VPN cannot forward any multicast and broadcast traffic as a result any dynamic routing protocol such as OSPF,RIP or EIGRP cannot forward traffic.GRE Protocol support transport traffic over IPSec VPN Tunnel.Mikrotik IPSec VPN tunnel protect LAN Traffic between two remote sites. Mikrotik 1 Router IP Address Configuration: [admin@MikroTik1] > ip address ...

Read More »

How To L2TP VPN Server Configuration Using Mikrotik Router

L2TP used by service providers to provide VPN service over the internet.It is extension protocol of PPTP.L2TP dose no support encryption or confidentiality .L2TP packet including payload and header is sent  within UDP.L2TP have two endpoints LAC and LNS. L2TP full meaning Layer 2 Tunneling Protocol,L2TP is Microsoft propitiatory,that can support Remote desktop VPN Server without any other VPN Software.It is easy ...

Read More »

How To Site to Site L2TP VPN Tunnel in Mikrotik Router

[admin@HQ Router] > address add address= 180.140.100.2/30 interface=ether1 [admin@HQ Router] > address add address= 172.16.1.1/24 interface=ether2 [admin@HQ Router] > interface l2tp-server server set enabled=yes[admin@HQ Router] > ppp profile add name=L2TP local-address=172.16.100.1 remote-address=172.16.100.2[admin@HQ Router] > ppp secret add name=test profile=L2TP service=l2tp password=123 local-address=172.16.100.1 remote-address=172.16.100.2 routes=”10.1.1.0/24,172.16.100.2″[admin@HQ Router] > ip route add dst-address=0.0.0.0 gateway=180.140.100.1 [admin@HQ Router] > ppp active print Flags: R – ...

Read More »

How to Use PPTP Client in MikroTik Router Setup

Connecting Remote Client The following example shows how to connect a computer to a remote office network over a PPTP encrypted tunnel giving that computer an IP address from the same network that the remote office has (without any need of bridging over EoIP tunnels). Consider following setup:            

Read More »